Some Business DIY: Building A Concrete Wall

0

A concrete wall is not only a practical addition to the outside area of your company, but it can also be a beautiful one too. If you are looking for a way to break up your exterior space and give it more personality, then a concrete wall presents you with the basis of doing so.

You can easily build a concrete wall yourself if you follow this step by step guide. Nevertheless, if you are unsure then it is recommended that you use the services of professionals. This won’t cost you too much and it will give you the peace of mind that it has been done properly. However, if you are confident you can handle the task yourself, read on…

The first thing you need to do is determine the measurements of the wall you are going to build. It is always a good idea to draw out a plan. If you feel it would be of aid to you then grab a piece of paper and sketch out a drawing reflective of your measurements. This is recommended because you will be able to visualise how the measurements are going to look and so you will note if anything looks out of proportion.

Now you have done this you need to do further calculations. You will need to determine how many concrete blocks you will need to build your business wall. It is always better to have one or two concrete blocks over. You don’t want to run the risk of not having enough as you will halt the process of the construction.

Once you have done this make sure you mark out where you want your wall to be. The best way to do this is through the use of stakes. When it comes to building a concrete wall it differs regarding how you do this depending on the space upon you are constructing your wall. Ideally, you want a flat surface area so you can build the wall evenly and stably. If your surface is not flat then you will need to prepare the land in order to ensure this is the case. This is where wacker plates come in. You can easily hire such machinery online today.

When you start to build your wall you will work from the ends to the centre. This is important otherwise you run the risk of your walls being wonky. You will obviously not only need to make sure that the block is straight but it also needs to be firm before you can continue onto the next block of concrete. Repeat this process until you are left with a beautiful concrete wall. Remember you always need to build up the corners before you proceed towards the middle. Once you have completed this you should tap the concrete blocks immediately after with the use of a rubber mallet.

So there you have it; a very straightforward guide for those who are looking to build a concrete wall for the first time. You need to be mindful of the fact that this is a guide for those who have the surface flat and prepared. If this is not the cast then you will experience trouble gaining your desired results.


Share.

About Author

Ben is a follower of Christ, a rabid computer geek, small business owner, and breaker of things. He is married way above his station in life and has three wonderful children who have made driving him insane their mission in life.

Leave A Reply